Bluetooth Setup in Ubuntu

https://help.ubuntu.com/community/BluetoothSetup

for me, whenever I want to connect my cordless mouse, do the following two steps:
1. sudo /etc/init.d/bluetooth restart
2. sudo hidd --search

get the system properties in matlab

For example, we have a state space system called "demo", in order to get the A, B, C, D matrices of that system, there are two ways:

1. get(demo, 'A'), get(demo, 'B')...get(demo,'D')
2. demo.A, demo.B, demo.C, demo.D

simulation when lpm_ram_dq is used

When lpm_ram_dq is used to create memory, the simulation provided by Quartus II doesn't work any more.

high impedance in vhdl

Although vhdl is case insensitive, when it comes to high impedance, "Z" must be used instead of "z".

microcomputer design

load: 1,3
-- load register 3 with the memory data whose address is stored in register 1.

store: 2,4
-- put the data stored in register 2 into the memory address stored in register 4.

brgtI: 1,7, 58
-- branch to memory 58 if data stored in register 1 is greater that register 7.

VHDL Notes

1) .acf: pin assignment and configuration file
2) .mif: memory initialization file

3) LPM Components

Altera MAX+PlusII contains a Library of Parameterized Modules(LPM) that allows implementation of devices such as RAM, ROM, arithmetic devices, etc. The size of the devices are parameterized. That is, the number of bits in the operands are specified at the time an instance of the component is made. In order to use these components, you must declare the LPM library(LIBRARY lpm;) and specify which package to use in this library(USE lpm.lpm_components.all;). The following example shows how to use a LPM add/subtract device to create a 32-bit add/subtract unit.

LPM Example

LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY lpm;
USE lpm.lpm_components.all;

ENTITY add_subt IS
PORT(a, b: IN std_logic_vector(31 downto 0);
a_s: IN std_logic;
answer: OUT std_logic_vector(31 downto 0));
END add_subt;
ARCHITECTURE struct OF add_subt IS
BEGIN
-- u1 is an arbitrary name of the instance
u1: lpm_add_sub -- This is the name of the component
GENERIC MAP(lpm_width => 32)
-- data, datab, add_sub, result are the formal parameter names
PORT MAP( dataa => a, datab => b, add_sub => a_s,
result => answer);
END struct;

A list of LPM components is available using HELP-> megafunctions/LPM in Altera MAX+PlusII.

Initial values of variables and signals in VHDL

Initial values when declaring a signal can only be used in simulation and will be ignored in synthesis.

Initial values when declaring a variable may be ignored in synthesis, as far as I know.